⚙ AI Tools/2026-06-18Intermediate

Using the v2.1.4 Quota Screen for a Weekly Reckoning: Reading Used and Remaining to Run an Indie Budget

How to turn the used/remaining display in the reworked Antigravity v2.1.4 quota screen into a weekly reckoning instead of a gut feeling. Baseline recording, burn-rate math, and allocation across multiple projects, written as an indie-dev operating routine.

antigravity³⁷⁴ quota⁷ cost-control⁵ indie-dev¹⁸ workflow⁴³

✦ Premium Article

In Antigravity v2.1.4, the quota screen now lays out "how much you used" and "how much is left" side by side. It looks like a minor change, but for someone running several automations as an indie developer, it is a real improvement. What used to rest on a vague "I feel like I'm overspending this month" can now be said in two numbers: used and remaining.

But staring at the screen is not a reckoning. I use these numbers as the starting point for a once-a-week reconciliation. Instead of panicking on a hunch that "it looks short," I work the exhaustion date backward from what remains, and decide in advance what to stop if it falls short. Here is the procedure.

What changed when it shifted to "remaining"

The old quota display centered on cumulative usage. You could see how much you had used, but not intuitively grasp "how many more runs do I have left." By pushing remaining to the front, v2.1.4 shifts the axis of judgment from "amount used" to "amount left."

That difference is larger than it looks. When remaining is visible, you naturally start asking "will this last to month end?" After the display changed, I myself finally noticed my habit of overspending in the first half of the month.

Convert used and remaining into rates

The first move is to turn the two numbers into rates. Left raw, they stop being comparable the moment your plan changes.

def quota_status(used: float, remaining: float):
    total = used + remaining
    used_pct = used / total * 100
    remaining_pct = remaining / total * 100
    return {
        "total": total,
        "used_pct": round(used_pct, 1),
        "remaining_pct": round(remaining_pct, 1),
    }
 
# Example: day 14 of the month, used=620 / remaining=380
print(quota_status(620, 380))
# {'total': 1000, 'used_pct': 62.0, 'remaining_pct': 38.0}

If you have used 62% by day 14, you are well past a simple linear share (around 46.7%). At this point you know you must run the remaining 16 days on 38%. Converting to a rate alone makes the situation visible before you panic.

✦

Thank you for reading this far.

Continue Reading

What follows includes implementation code, benchmarks, and practical content we hope you'll find useful. This site runs without ads — server and development costs are supported entirely by members like you. If it's been helpful, we'd be truly grateful for your support.

WHAT YOU'LL LEARN

✦How to convert used/remaining into a rate and burn rate to predict the exhaustion date

✦An operating routine for recording a Monday baseline and catching skewed consumption in numbers

✦Criteria for allocating quota across projects and prioritizing when exhaustion looms

Secure payment via Stripe · Cancel anytime

✦

Unlock This Article

Get full access to the rest of this article. Buy once, read anytime. This site is ad-free — your support goes directly toward keeping it running.

Unlock all articles with Membership →

Predict the exhaustion date with a burn rate

After the rate comes daily consumption — the burn rate. With it you can predict the day the quota empties at the current pace.

def predict_exhaustion(used: float, remaining: float, day_of_month: int):
    burn_per_day = used / day_of_month          # consumption per day
    days_left = remaining / burn_per_day if burn_per_day else 999
    return {
        "burn_per_day": round(burn_per_day, 1),
        "days_until_empty": round(days_left, 1),
    }
 
print(predict_exhaustion(620, 380, 14))
# {'burn_per_day': 44.3, 'days_until_empty': 8.6}

A result of only 8.6 days of remaining quota on day 14 means it will not last to month end: 8.6 days against 16 remaining. To close that gap, you can say concretely that the burn rate must drop by about 46%. Where a hunch would end at "let's economize a bit," the number tells you "cut it nearly in half."

Allocate quota across multiple projects

When you run several automations as an indie developer, there is one quota but many mouths feeding on it. I run four blog automations under Dolice Labs, so how to split the limited remainder is a weekly question.

Use	Nature	Weekly share	On exhaustion
Production scheduled runs	A gap appears if stopped	50%	Protect to the end
Quality improvement / edits	Little impact if delayed	30%	Roll over to next week
Prototyping / validation	Stoppable anytime	20%	Stop first

The crux of allocation is deciding the order of what may be stopped, in advance. Decide "which to stop" only after you are nearly out, and you usually drag down even the one you least wanted to touch. Decide in calm times that only the production work tied directly to AdMob revenue gets protected to the end, and you will not hesitate when it matters.

Priorities when exhaustion looms

Once the burn rate starts to exceed your allocation, act in the following order. The rule is to throttle from the smallest impact, not to panic-stop everything.

Halt prototyping and validation jobs. That alone closes the 20% mouth.
Halve the frequency of quality improvement. It is not production, so delay is tolerable.
For production work, lower the retry cap by one notch. Reduce aggressive retries — not by swallowing failures.
If still short, widen the production run interval. The last resort.

Keep this order and even a thin remainder minimizes the impact on "what readers see." I keep this priority fixed in an operating note and, in a week that nearly runs out, simply follow it. Not making the call in the moment is, in the end, what cuts incidents the most.

Make the weekly reckoning a routine

Finally, fold all of this into a once-a-week reconciliation. Monday morning, open the quota screen, note used/remaining, compute the rate and burn rate, and predict the exhaustion date. If you are over your allocation, decide what to stop first using the priorities above. It takes about five minutes.

Since making those five minutes a habit, I no longer hit the accident of quota running dry and production stopping at month end. The remaining display is a tool for reckoning, not for staring. Next time you open the quota screen, jot down used and remaining once, and start by converting them to a rate.

Thank You for Reading

Antigravity Lab is ad-free, supported entirely by members like you. We publish practical guides daily with implementation code, benchmarks, and production-ready patterns. If you've found it useful, we'd love to have you on board.